The Ego7 sees the culmination of many months of design, experimentation and testing in the smallest, lightest Ego that Eclipse have ever produced. Not just a new milling job and some new anodised fancy colours, the Ego7 has undergone a complete re-design and re-build from the ground up. Almost every component of the Ego7 has been improved to either increase performance, reduce size and weight, improve user-maintenance, improve reliability, or just make it plain better looking. Features: NEW Ultra-Lightweight Monoform Body Deftek Offset Feed Tube NEW Flusher-Fitting Eye Covers NEW Integrated Rammer Housing NEW Integrated FRM NEW Lightweight Rammer NEW Larger Valve Chamber NEW High-Flo Valve NEW Lower Operating Pressure NEW Swivel Stainless Banjo QEV NEW Micro + Opto Switch Board NEW Duel Instrument Grade Ball-Raced Trigger Magnetic Trigger Return NEW Skinny-Fit Co-Moulded Rubber E-Star Grips NEW T-Slot Rail Mounting System Capped and Uncapped Semi and Ramping Modes 9 Debounce Modes NEW 07 Cure Bolt NEW Direct-Acting Solenoid LCD Display NEW Swivel In-Line Regulator NEW Lever Operated Clamping Feed NEW Shaft II 2-Piece 14 inch 0.693 Barrel NEW 07 On/Off/Purge System Lower Cyclic Mass Less Kick Quieter Shot Same Excellent Efficiency Low Profile Break-Beam Eyes All Weights and Measurements Include 14 inch Barrel, On/Off/Purge System , Battery etc. Full Set-Up Ready to Go: Length: 531mm Height: 216mm Width: 26mm Weight: 941g / 2.07 lbs Warranty: Planet Eclipse provides excellent customer support for their guns. Planet Eclipse DOES NOT accept any returns for refund. If you have any problem with your gun, you must work directly with their customer service at (401) 247-9061. This includes any problems that are encountered out of the box. Armageddon Paintball, Inc. will only accept Planet Eclipse guns that are brand new and unopened for return. The ETek Ego is a completely new Ego designed from the ground up. Although some of the parts are interchangeable with the Eclipse Ego, such as eye covers, LPR cap, Feed Tube etc the majority of the internals, frame, trigger and body are not. They have been designed with simplicity and durability in mind, yet also keep the same high performance expected from an Eclipse Family product. In order to differentiate between the new ETek range and the Eclipse Ego6 range we have removed some User and Performance features. There is no LCD display, for example, but we have replaced it with 3 True-color LEDs that can be used to display modes, marker condition and used to quickly and easily modify and set parameters whilst in programming mode. There is the potential to have virtually all the adjustability of a standard Eclipse Ego, with ROF cap, Mode, Dwell, Debounce etc however obvious things like Peak ROF indicator, timer etc are lost once the LCD is removed. The Integrated QEVs have also been removed from the rammer system to further differentiate the performance characteristics of the two lines, as has the optical switch used in the trigger mechanism, replaced instead with a more conventional micro-switch. The ETek is designed and executed using the same philosophy as the original Ego. That is performance, durability, ease of use, ease of maintenance and ease of technical trouble-shooting. In all the areas that the Ego performs so highly in regard to durability and user-friendliness the ETek Ego has it at the very least matched. In some areas, with the removal, for example, of the QEVs, maintenance of the rammer and valve is now even further simplified. We believe that just because this is lower cost product that it shouldn’t use intelligent design or be any less user-friendly than previous Eclipse products. The ETek will accept all current ‘06 CCU (Color Contrast Kit) and C-Lever Clamping Feeds. It will also accept any 05 or 06 Aftermarket Bolt (Nexus, Dart Etc). It still utilizes Cocker Barrel threads, and has a standard slide-rail ASA mount on the frame. Body – New 06 ETek Body. Def Tek offset feed tube, No Frame Tag slot, No Frame Tag, Body-Ported Barb Fittings for Rammer Inlets. Dual ETek Rubberised jewels, ‘Cocker Threads Feed Tube – Standard Clamping Feed Tube the same shape, size and fitting method as Ego 5 and 6 Barrel – New 13” Length, reduced porting, reduced external machining, new formed stick-in rubber badge. ‘Cocker threaded. Bolt – New Shape. Much shorter version of Ego 5 Bolt. Same Ramped Top, ramped ball detent grooves, open bolt face, Drilled single hole inlet, plain shape at rear. Interchangeable with all Ego 05 and 06 bolts. New Valve Chamber and Valve – Enlarged Valve chamber offers operating pressures of 250-280 psi Rammer Housing – New ETek Rammer and Rammer Housing. No QEVs, but direct Fore and Aft Porting to Rammer. Does not accept any Ego 05 or 06 stock OR aftermarket rammers or rammer housings. Bolt Pin – New Shape. Plain Turned Pin. Larger diameter to allow easier grip and removal Ball Detents – Same as Ego 6 Eye Covers – Same as ’05 Ego and Ego 6 LPR – Adjustable LPR. Remodelled cap. Large Valve chamber for low pressure operation. FRM – New Shape and Mounting system. Inline Reg – New Shape for ‘06 ETek, same internals as and Ego 5 and 6, Swivel Inlet Frame – New Shape, larger trigger guard, single push-button, 3 x True-color LEDs, Rubberised aesthetic semi-transparent control console with EGO logo and viewing windows for LEDs, 4 x tapped bottom-line mounting holes. Spring trigger return, micro switch operation. Integrated slide rail/dove-tail Trigger – New for ‘06 ETek. Blade profile, radius edges, thinner section, centrally mounted trigger prong for enhanced PCB contamination protection. Parameters – Firing Mode, Eye Off ROF, Capped Modes ROF (Semi 1 is Uncapped), Valve Dwell, Debounce, Ball-in-Place PCB – New for ‘06 ETek featuring a micro-switch trigger, 3 x True-color LED, Single external push button, single set-up button, all tourney modes: Semi, Capped Semi. Capped Ramping (NPPL, PSP, Millennium compatible), and a locking facility to make tournament legal. On/Off/Purge System – same as system found on SL66 Break-Beam Eyes – High efficiency break-beam eyes and advanced eye logic. Auto-off default. Grips – ‘05 Ego and Ego 6 Style mounting. Current grip is same as the existing Ego 6 grip. Soft rubber wrap-around with metal jewel Logo. Weight: 1.12 kg / 2.47 lb with Barrel, On/Off/Purge, Regulators, Fittings and Battery Length: 508mm / 20.0” with 13” Barrel Width: 28mm / 1.1” with Eye Covers Height: 225mm / 8.8” Including Feed Tube and On/Off/Purge Assembly Warranty Information: Planet Eclipse provides excellent customer support for their guns. Planet Eclipse DOES NOT accept any returns for refund. If you have any problem with your gun, even right out of the box you must work directly with their customer service at (401) 247-9061. We will only accept Planet Eclipse guns that are brand new and unopened for return. Unique SL74 Features: SL OOPS Assembly SL In-Line Regulator SL Valve Guide Kit SL Trigger Frame SL Trigger SL Zick Kit Rammer Cap SL Zick Kit Rammer Shaft SL LPR Torpedo SL LPR Cap SL LPR Body SL LPR Piston SL Cure Bolt SL Contour Eye Covers SL PCB Board Dual Swivel Hi-Flo QEVs 5-Piece SL Shaft Barrel Kit Viz-Eyes Red BBSS System Expansion Port on PCB Ego7 Features: Ultra-Lightweight Monoform Body Deftek Offset Feed Tube Integrated Rammer Housing Integrated FRM Larger Valve Chamber Lower Operating Pressure Micro and Opto Switch Board Duel Instrument Grade Ball-Raced Trigger Magnetic and Spring Trigger Return Skinny-Fit Co-Moulded Rubber E-Star Grips T-Slot Rail Mounting System Capped and Uncapped Semi and Ramping Modes 9 Debounce Modes Direct-Acting Solenoid LCD Display Lever Operated Clamping Feed All Measurements include Barrel (14 Inch), OOPS, Battery, Ready-to-go: Length: 536 mm Height: 218 mm Width: 26.5 mm Weight: 859g/1.89lb Operating Pressure: Approx. 285 FPS at 180 PSI With LP Valve Guide Warranty: Planet Eclipse provides excellent customer support for their guns. Planet Eclipse DOES NOT accept any returns for refund. If you have any problem with your gun, you must work directly with their customer service at (401) 247-9061. This includes any problems that are encountered out of the box. Armageddon Paintball, Inc. will only accept Planet Eclipse guns that are brand new and unopened for return.